Unveiling the Suplaud RO Filtering Purifier – Your Ultimate Under Sink Water Filtration Solution

Are you seeking a solution to your water fears? Look no further than the Suplaud RO Filtering Purifier. This small gem is more than just another water filtration system; it’s a game changer for clean, safe drinking water. With superior filtration technology, simple installation, and unique features, it stands out as a dependable option for families and businesses. 

Let’s dig in and explore what makes it stand out from the crowd.

What’s in the box? 

The  box of  Suplaud RO Filtering Purifier includes the following items:

  • System Housing with Filters Preinstalled: 1
  • Faucet Stem: 1
  • Nut: 1
  • Rubber Gasket: 2
  • Smart Faucet: 1
  • Filtered Water Tube (1/4″ White PE Tube): 1
  • Waste Water Tube (1/4″ Red PE Tube): 1
  • Inlet Water Tube (3/8″ Blue PE Tube): 1
  • Lock Clip: 6
  • Drain Saddle with Nuts & Bolts: 1 set
  • Foam Seal: 1
  • Teflon Tape: 1
  • Quick Connector: 1
  • Power Adapter: 1
  • Feed Water Adapter: 1
  • Converter: 2
  • User Manual: 1

Other tools that are required but are not included in the box:

  • Variable speed drill
  • Drill bit: 1/4″ (for drainpipe) and 1″ (for faucet hole)
  • Adjustable Wrench
  • Philips Screwdriver
  • Utility knife
  • Flashlight
  • Towel

How to install the Suplaud RO Filtering Purifier?

The detailed Suplaud RO Filtering Purifier installation process is mentioned below:

Feed Water Adapter Installation:

  1. Turn off the cold water supply valve beneath the sink and open the kitchen faucet to release any built-up pressure.
  2. Disconnect the cold water pipe from the cold water supply valve.
  3. Apply several rounds of Teflon tape to the cold water supply valve and the threaded end of the feed water adapter to prevent water leakage.
  4. Screw the feed water adapter onto the cold water supply valve and tighten it securely using a wrench.

Note: For 3/8″ cold water pipes, use the provided converters before attaching the feed water adapter.

  1. Connect the cold water pipe to the feed water adapter and tighten it securely with a wrench.

RO Faucet Installation:

  1. Slide the faucet stem onto the faucet and tighten it.
  2. Place the rubber gasket over the stem.
  3. Attach the quick connector to the filtered water tube connected to the faucet and secure it with a lock clip.
  4. Insert the faucet into the pre-drilled hole on the kitchen sink or countertop.
  5. Underneath the sink, secure the faucet with the rubber gasket and nut.

Drain Saddle Installation:

  1. Apply the foam seal provided onto the inside of the drain saddle, ensuring alignment with the drain saddle hole.
  2. Choose a suitable spot on the vertical drainpipe for installation.
  3. Drill a 1/4-inch hole into the drainpipe, taking care not to penetrate the opposite side.
  4. Slide the drain saddle onto one end of the red tube, then insert the tube into the drilled hole on the drainpipe.
  5. Secure the drain saddle onto the drainpipe by tightening the screws and nuts, ensuring the tube remains in the hole.
  6. Use a lock clip to secure the tube in place.

Connecting the Tubes:

Note: Avoid cutting the tubes if possible. Length: 59 inches. If necessary, cut neatly with a utility knife.

Blue Inlet Water Tube Connection:

  1. Insert one end of the blue inlet water tube into the feed water adapter. Secure the tube by inserting a lock clip into the connector slot.
  2. Insert the other end into the inlet water port. Gently pull the plastic ring of the port to create a slot and secure the tube with a lock clip.

White Filtered Water Tube Connection:

  1. Connect one end of the white filtered water tube to the quick connector. Use a lock clip to secure the tube in place.
  2. Insert the other end into the filtered water outlet and secure it with a lock clip.
  3. Insert the faucet power cord into the Smart Faucet port and tighten the nut.

Red Waste Water Tube Connection:

  1. Locate the red waste water tube attached to the drain saddle.
  2. Insert the other end into the wastewater outlet and secure it with a lock clip.

System Start-up:

  1. Turn on the cold water supply valve and feeder water adapter. Check for any water leakage at joints, fittings, valves, and tube connections.
  2. Plug in the power adapter.
  3. Press the rinse button on the front panel to initiate the system flushing process.
  4. Open the RO faucet and allow it to run for 30 minutes.

Notable Features 

Advanced 7-Stage Filtration Technology: Pure Water and Pure Peace of Mind

The Suplaud RO Filtering Purifier is a 7-stage deep filtering system that successfully removes contaminants including chlorine, lead, salt, rust, and more. The filtration precision of 0.0001μm (micron) assures healthy, safe, and clean water for your family.

Easy installation and quick change: DIY Made Delightful

The Suplaud system, designed for DIY enthusiasts, is easy to install thanks to its twist-pull filter design. Because of its simple system, replacing filters takes only 3 seconds. Maintenance is simplified because no tools or expert assistance are required.

The tankless design saves space: Sleek and Efficient.

Suplaud’s integrated waterway technology and tankless design maximize space while reducing the danger of secondary contamination. Its tiny design allows it to fit perfectly into any kitchen space.

The self-cleaning mechanism: Ensuring Longevity and Performance.

Suplaud’s tankless filter system includes a built-in self-cleaning mechanism that activates after 24 hours of inactivity to cleanse the RO membrane for 15 seconds. This assures peak performance and increases the system’s useful life.

600GPD High Flow Rate: Quenching Thirst with Efficiency.

Suplaud provides an amazing 600 gallons per day with a rapid flow rate of 600GPD, ensuring you have access to clean water anytime you need it. Staying hydrated has never been easier, thanks to its flow rate of 1.6 liters per minute and capacity to fill a cup in 8 seconds.

Versatile Applications: Meet Your Every Need

The Suplaud Tankless 600GPD water filtration system is suitable for a broad range of uses, including direct drinking, cooking, ice making, home cleaning, pet care, and infant care, ensuring that your water demands are satisfied throughout.

Smart Display: Real-time Monitoring.

Suplaud, which includes a faucet with a smart display, allows real-time monitoring of Total Dissolved Solids (TDS) after filtering as well as warnings about filter life. Keep track of your water’s quality with ease.

OWP Delay Protection: A Safety Net for Your Water System

The Suplaud system features built-in OWP delay prevention, which automatically shuts off water flow after a lengthy operation to prevent damage and ensure lifetime.

Final Verdict:

The Suplaud RO Filtering Purifier is a highly recommended under-sink water filtering system with exceptional performance, user-friendly design, and revolutionary features. It offers on every level, from superior filtration technology to space-saving tankless design and intuitive display. If you want a dependable option for clean, safe drinking water, go no further than the Suplaud RO Filtering Purifier. 

Buy a Suplaud RO Filtering Purifier today and say goodbye to contaminants and hello to hydration with Suplaud.



Add comment

Your email address will not be published. Required fields are marked *